Speaker Installation; Connecting The Optional Wireless Receiving Amplifier - Samsung HT-TX250 Instruction Manual

Speaker Installation

How to Install the Speaker and the Stand
1 2
3 4
5 6
14
1
Turn the STAND upside-down and connect it to
the STAND BASE.
2
Turning the screw (A) clockwise, connect it to two holes
marked with the arrow using a screwdriver as shown in
the illustration.
3
Turning the supplied screw (B) clockwise, connect it to a
hole on the rear of the Speaker STAND.
4
Connect the assembled stand to the SPEAKER.
5
Turning the screw (B) clockwise, connect to a hole on
the rear of the speaker using a screwdriver as shown
in the illustration.
6
This is the successfully assembled speaker.
• Make sure that the speaker is installed on a flat and stable area.
Otherwise it may be easily knocked over.
Component
STAND BASE
SPEAKER STAND Screw (A) Screw (B)

Connecting the Optional Wireless Receiving Amplifier

To connect the rear speakers wirelessly, you have to purchase the wireless receiving module and
TX card from your Samsung retailer.
When you have Purchased the Wireless Receiving Module (SWA-3000)
HT-X250
Rear Speaker (L)
WIRELESS RECEIVER MODULE
HT-TX250
Rear Speaker (L)
WIRELESS RECEIVER MODULE
Front Speaker (R)
Front Speaker (L)
Center Speaker
Subwoofer
Rear Speaker (R)
Front Speaker (R) Front Speaker (L)
Center Speaker
Subwoofer
Rear Speaker (R)
ENG
15 15