Installing The Main Unit - Samsung HT-TX250 Instruction Manual

Installing the Main Unit

Method 1 : Installing the Stand so that the DVD Player Lays Flat.
Preparation
 Disconnect the AC power cord from the AC outlet before installing the main unit.
 Connect the cables before installation.
1 2 3
18
4
1
Turn the stand counter-clockwise and pull it apart.
 The DVD Player and stand are separated.
2
Hold the DVD Player and stand as shown by the fi gure
and turn the right side of the stand upward so that it is
slightly slanted.
3
Insert the 2 stand anchors into the holes on the back of the
DVD Player.
4
Turn the right side of the stand clockwise to fi x it to the
back of the DVD Player.
• Be careful not to scratch the surface the DVD Player when
installing the stand.
• Do not turn the DVD Player left or right as it may separate
it from the stand.
Method 2 : Installing the Stand so that the DVD Player Stands up.
Preparation
 Disconnect the AC power cord from the AC outlet before installing the main unit.
 Connect the cables before installation.
1 2 3
1
2
3
4
Arranging the Cables
Use the cable tie to keep the cables together.
4
Turn the stand in the direction of the arrow and pull it apart.
 The DVD player and stand are separated.
Lift the right side of the stand so that it is slightly slanted.
Insert the 2 stand anchors into the holes on the bottom of
the DVD Player.
Turn the right side of the stand clockwise to fi x it to the
bottom of the DVD Player.
GB
19