Setting The Drc (Dynamic Range Compression); Setting The Av Sync; Setting The Hdmi Audio - Samsung HT-TX250 Instruction Manual

Settings
(Con't)

Setting the DRC (Dynamic Range Compression)

This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby
Digital sound when watching movies at low volume at night.
1
In Stop mode, press the MENU button.
2
Press the Cursor ▼ button to move to <Audio> and then press the ENTER button.
3
Press the Cursor ▼ button to move to <DRC> and then press the ENTER button.
4
Press the Cursor ▲,▼ button to adjust the DRC.
 When the Cursor ▲ button is pressed, the effect is greater, and when the
MOVE ENTER RETURN EXIT
Cursor ▼ button is pressed, the effect is smaller.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
CHANGE RETURN EXIT

Setting the AV SYNC

Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match
the video.
1
In Stop mode, press the MENU button.
2
Press the Cursor ▼ button to move to <Audio> and then press the ENTER button.
3
Press the Cursor ▼ button to move to <AV-SYNC> and then press the ENTER button.
4
Press the Cursor ▲,▼ button to select the AV-SYNC Delay Time and then
press the ENTER button.
MOVE ENTER RETURN EXIT
 You can set the audio delay time between 0 ms and 300 ms.
Set it to the optimal status.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
MOVE SELECT RETURN EXIT
52

Setting the HDMI Audio

The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
1
In Stop mode, press the MENU button.
2
Press the Cursor ▼ button to move to <Audio> and then press the ENTER button.
3
Press the Cursor ▼ button to move to <HDMI AUDIO> and then press the
ENTER button.
4
MOVE ENTER RETURN EXIT
Press the Cursor ▲,▼ button to select <ON> or <OFF> and then press the
ENTER button.
• ON : Both video and audio signals are transmitted over the HDMI connection cable,
and audio is output through your TV speakers only.
• OFF : Video is transmitted over the HDMI connection cable only, and audio is output
through the home theater speakers only.
MOVE SELECT RETURN EXIT
• The default setting of this function is HDMI AUDIO OFF.
• HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
GB
53