Setting Up The Unit - Panasonic EP-MA03 Operating Instructions Manual

Massage lounger
Hide thumbs Also See for EP-MA03:
Table of Contents

Advertisement

SETTING UP THE UNIT

TO START WITH (INSTALLATION LOCATION)
Before taking the unit out of the box, decide where it is going to be set up.
Ensure that there is enough space for the unit power switch to be operated. (Approx. 10 cm of space in both the rear and on both sides)
Keep at least 3 cm away from the wall.
( When the backrest is fully reclined)
Depth Approx. 178 cm
(When the leg/foot massage section is raised : Approx. 188 cm)
Depth Approx. 157 cm
Depth Approx. 150 cm
Area where the unit and leg/foot massage section
touch the floor Approx. 102 cm
Do not expose the massage lounger to direct sunlight or high temperatures, such as in front of heating sources, because this
can cause discoloration or hardening of the synthetic leather.
Make sure to install the unit so that the back side of the main unit does not touch the wall or any objects. (Failure to do so may
cause damage such as the back side deformation.)
least 63 cm × 104 cm) to cover the areas where the unit touches and where the leg/foot massage section could touch the
Install the unit near a power outlet.
EN8
EP-MA03.indb
8
Width
Approx. 78 cm
Mat
More than 10 cm
(When the backrest
is fully upright)
2012/07/09
17:42:42

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents