Procedure; Removing The Sadf Motor Unit (Mf4870Dn/Mf4830D); Preparation - Canon imageCLASS MF4890dw Service Manual

4
Disassembly/Assembly > Document Exposure/Feeder System > Removing the SADF Motor Unit (MF4870dn/MF4830d) > Procedure
Caution:
When install the SADF upper cover, be sure that the guide[1] does not get inside
the[A] part.
[A]
[1]
4 Disassembly/Assembly > Document Exposure/Feeder System > Removing the SADF Motor Unit (MF4870dn/MF4830d) > Procedure

Removing the SADF Motor Unit (MF4870dn/MF4830d)

■ Preparation

1) Remove the left cover.
2)Remove the SADF unit and reader unit
3)Remove the SADF unit.

■ Procedure

1) Open the SADF pickup tray[1] and remove the SADF pickup tray.
• 2 shafts[2]
[1]
[2]
2) Open the SADF upper cover[1] and remove the SADF rear cover[2].
• 3 claws[3]
[1]
x3
4-67
[2]
F-4-164
[2]
[3]
[3]
[3]
[2]
F-4-165
4-67