Canon imageCLASS MF4890dw Service Manual page 124

4
Disassembly/Assembly > Document Exposure/Feeder System > Removing the DADF Pickup Unit (MF4890dw/MF4880dw) > Procedure
[2]
[3] [1]
[2]
Caution:
When assembling the DADF upper front cover, align the 2 hooks[1] at left side to
DADF front cover hole[A] to install the cover.
[A]
[1]
4 Disassembly/Assembly > Document Exposure/Feeder System > Removing the DADF Pickup Unit (MF4890dw/MF4880dw) > Procedure
3)Open the DADF tray[1] until it stops. Then release the claw by pushing the hook[2] in the
direction of the arrow[A] with a flat-blade screwdriver, and move the tray in the direction of
the arrow.
[2]
F-4-119
4)Open the DADF tray[1] to the position shown in the figure below, and remove it upward.
[1]
[3]
[1]
F-4-121
4-48
F-4-120
4-48