Order Number And Firmware Version; Boundary Conditions - Siemens SIMOTION ADI4 Manual

General
1.1 Overview
1.1.3

Order number and firmware version

Order number
Order no.: 6FC5 211-0BA01-0AA4
Firmware version
The firmware version is not displayed directly on the module. The order number and
firmware version correlate as follows:
Order number
6FC5 211-0BA01-0AA0
6FC5 211-0BA01-0AA1
6FC5 211-0BA01-0AA2
6FC5 211-0BA01-0AA3
6FC5 211-0BA01-0AA4
1.1.4

Boundary conditions

Boundary conditions for the ADI4 module
The following boundary conditions must be taken into account for the module:
● An ADI4 DP slave can only be operated on an equidistant PROFIBUS DP.
● An ADI4 DP slave is not a certified DP standard slave as defined by the PROFIDrive
10
profile. For example, the ADI4 DP slave does not enable acyclic communication.
Firmware version
1.1.4
1.2.2
1.3.1
1.4.4
1.4.7
SIMOTION ADI4 - Analog Drive Interface for 4 Axes
Manual, 05/2009, 6FC5 297-0BA01-0BP6