Yamaha DIGITAL MIXING STUDIO 01X Owner's Manual page 111

Button
[f]
[SHIFT]+[f]
[■]
[>]
[●]
[SHIFT]+[●]
[ZOOM]
FOOT SWITCH 1
FOOT SWITCH 2
Dial
[SCRUB]
[SHIFT]+[SCRUB]
TRACK mode [SHIFT]+[PAN] (Track Parameter mode)
[SHIFT]+[PAN] ➝ [SHIFT]+[PAN] (Selected Channel mode)
Knobs 1 – 8 (turning)
Knobs 1 – 8 (pressing)
PAN mode [PAN]
[PAN] ➝ [PAN] (Selected Channel mode of PAN/SURROUND)
Knobs 1 – 8 (turning)
Knobs 1 – 8 (pressing)
SEND mode [SEND]
[SEND] ➝ [SEND] (Selected Channel mode)
Knobs 1 – 8 (turning)
Knobs 1 – 8 (pressing)
PLUG-IN mode [SHIFT]+[PLUG-IN]
[SHIFT]+[PLUG-IN] ➝ [SHIFT]+[PLUG-IN] (Selected Channel mode)
[SHIFT]+DISPLAY [ / ]
Knobs 1 – 8 (turning)
Knobs 1 – 8 (pressing)
EQ mode [EQ LOW]/[EQ LOW-MID]/[EQ HIGH-MID]/[EQ HIGH]
[EQ LOW]/[EQ LOW-MID]/[EQ HIGH-MID]/[EQ HIGH] ➝
[EQ LOW]/[EQ LOW-MID]/[EQ HIGH-MID]/[EQ HIGH] (Selected Channel mode)
(in the Selected Channel mode) [EQ LOW]/[EQ LOW-MID]/[EQ HIGH-MID]/[EQ HIGH] (Band mode)
Knobs 1 – 8 (Band mode)
Faders (Band mode)
[SHIFT]+DISPLAY [ / ]
DYNAMICS (Compressor) mode
[SHIFT]+DISPLAY [ / ]
Knobs 1 – 8 (turning)
Knobs 1 – 8 (pressing)
Forward (or Fast Forward). When the Marker is turned on, this operation moves the song
position to the next Marker.
Moves the song position to the end of the song. When the Marker is turned on, this oper-
ation opens the window for entering the Marker.
Stops recording or playback.
Press to start playback.
Press this to start song recording. The [>] (Play) and [●] (Rec) lamp are turned on dur-
ing recording.
Starts recording automation. The [>] button lights while data is being recorded.
Turns Zoom on and off.
Foot SW A as defined in SONAR.
Foot SW B as defined in SONAR.
Controls one of these three functions: Scrub, moving of the song position, or data entry.
Turns Scrub on and off. When Scrub is on, the dial can be used for Scrub playback.
When Scrub is off, the dial is used to move the song position.
Activates data entry for the dial.
For editing parameters.
For editing parameters./Resets the parameter value to its default.
For editing parameters.
For editing parameters./Resets the parameter value to its default.
For editing parameters.
For editing parameters./Resets the parameter value to its default.
Changes the Plug-in number.
For editing parameters.
For editing parameters./Resets the parameter value to its default.
For editing each frequency band.
For editing the gain of each Band.
Changes the EQ number.
[DYNAMICS]
[DYNAMICS] ➝ [DYNAMICS] (Selected Channel mode)
Changes a DYN number.
For editing parameters.
For editing parameters./Resets the parameter value to its default.
Function
*22
*22
*22
*22
*22
Remote Function List
Notes
LED
(page 114)
— *33
—
—
lights *33
lights
—
lights
—
—
—
lights/goes out *20
flashes
lights
— *18
—
lights
— *18
—
lights *31
— *18
lights *21
— *11
— *18, 34
— *34
lights
—
—
— *11
lights
— *11
— *18
—
111
01X Owner's Manual