Yamaha DIGITAL MIXING STUDIO 01X Owner's Manual page 105

Button
[F8] ([SAVE] flashes)
[SHIFT]+[F1]
[SHIFT]+[F2]
[SHIFT]+[F3]
[SHIFT]+[F4]
[SHIFT]+[F5]
[SHIFT]+[F6]
[SHIFT]+[F7]
[SHIFT]+[F8]
[UNDO]
[SHIFT]+[UNDO]
[SAVE]
[MARKER]+[WRITE]
[r]
[MARKER]+[r]
[f]
[MARKER]+[f]
[■]
[>]
FOOT SWITCH 1
[●] or FOOT SWITCH 2
[ZOOM]
Cursor [ ] ([ZOOM] goes out)
Cursor [ ] ([ZOOM] goes out)
Cursor [ ] ([ZOOM] goes out)
Cursor [ ] ([ZOOM] goes out)
Cursor [ / / / ] ([ZOOM] lights)
Dial
[SCRUB]
PAN mode [PAN]
Knobs 1 – 8 (turning)
Knobs 1 – 8 (turning)
[SHIFT]+Knobs 1 – 8 (pressing)
AUX SEND mode [SEND] (Not available when the AUX/BUS window is active.)
Knobs 1 – 8 (turning)
[SHIFT]+Knobs 1 – 8 (pressing)
EFF SEND mode [EFFECT] (Not available when the AUX/BUS window is active.)
Knobs 1 – 8
[SHIFT]+Knobs 1 – 8
No function
[REC RDY] [LOOP] [EDIT] [FLIP]
This cancels the Save operation, when the final confirmation for Save appears ([SAVE]
flashes).
Brings the Track View window to the front of the computer screen. (This operation
applies to the current song.)
Displays the Mixer window (Audio Mixer/Multi Part Editor) or brings it to the front of
the computer screen.
Displays the List window or brings it to the front of the computer screen.
Closes the current window.
Displays the Piano Roll window or brings it to the front of the computer screen.
No function
Starts the TWE (Wave Editor).
Alternately hides/shows the Transport window (Transport Bar/Location Bar/Record).
Executes the Undo operation.
Executes the Redo operation.
When the lamp lights, press this so that the lamp flashes. Press this again to execute the
Save operation (lamp turns off). Press [F8] to cancel it.
Enters/clears a Marker at the current song position.
Press briefly to move back one measure at a time, or hold to continuously rewind.
Moves the song position to the previous Marker.
Press briefly to move forward one measure at a time, or hold to continuously fast-for-
ward.
Moves the song position to the next Marker.
Press to stop recording or playback. Pressing this when playback is stopped goes to the
top of the song.
Press to start playback from the current point.
Playback/Stop
Press this to enter/exit from the Recording Standby. The [>] (Play) and [●] (Rec) lamp
are turned on during recording.
Turns Zoom on and off.
Moves the cursor (indicating the current track) up.
Moves the cursor (indicating the current track) down.
Selects the previous block.
Selects the next block.
Zooms in/out in the active Track View and Piano Roll Window.
Moves the song position. (See "SCRUB" below.)
Determines how the Scrub function is applied when using the dial. When this is set to on,
Scrub moves according to the Grid position in the Track View window. When set to off, it
moves in measures.
Edits the Pan (on page 1).
Edits the Input level (on page 2).
Resets the edited parameter to the default value (CENTER/0.00).
Edits the AUX Send Level.
Resets the edited parameter to the default value (-
Edits the Effect Send Level.
Resets the edited parameter to the default value (-
Function
∞
).
∞
).
Remote Function List
Notes
LED
(page 114)
—
—
—
—
—
—
—
—
—
—
—
lights/flashes
—
—
—
—
—
—
lights
—
lights
lights
—
—
—
—
—
—
lights/goes out
lights
—
—
—
lights
—
—
lights
—
—
105
01X Owner's Manual