Yamaha DIGITAL MIXING STUDIO 01X Owner's Manual page 100

Function Tree/Function List
Function name/
Knob
settings
SEND [INTERNAL] → ([SELECTED CHANNEL]) → [SEND]
SEND 1 – 4 (AUX Send Level 1 – 4 )
q i
–
∞
- – +6.0
w y
( / )
AX 1 – 4-PP/AUX 1 – 4PREPOST (AUX1 – 4 PRE/POST)
q i
–
PRE/POST
e u
( / )
ON/OFF (Selected Channel only)
q t
( / ) ON/OFF
DYNAMICS [INTERNAL] → ([SELECTED CHANNEL]) → [DYNAMICS]
ON/OFF
q i
–
q
( )
Parameters 1 – 6 (Selected Channel only)
e i
( – )
DYNAMICS LIBRARY (Selected Channel only)
q r
– 01 – 128
z v
– (Title Edit)
100
01X Owner's Manual
Explanation
Determines the Aux Send level of the Input Channels. When the channel knob
is pressed, the level is set to nominal (0dB).
• To assign a pair, simultaneously press and hold down the [SEL] button for one
AUX bus and press the [SEL] button of the adjacent AUX (paired numbers
should be odd/even and in order). (See page 102.)
• When using an internal effect via the Aux Send, do NOT turn up the send
level to the corresponding AUX bus for the channel to which the effect
return signal is routed. Doing so will result in loud feedback, and may
damage your equipment. For example, when the 01X is in the default
condition, AUX 3 is routed to the input of internal effect 1, and the L/ R
signals of the ST IN channel 1 are routed to the output. If you turn up the
send level of ST IN channel 1 to AUX 3, a feedback loop is created.
Determines the Aux Sends signal source points. The PRE sends pre-fader sig-
nals, and the POST sends post-fader signals.
Determines whether Aux Send is on or off. The channel is muted with the Off
setting.
Determines whether Dynamics is on or off. Parameters depend on the
Dynamics Types selected in the Library as follows. Dynamics is not available
for the ST IN channels.
Dynamics Compressor/
Type Expander
Parameter 1 THRESH
Parameter 2 RATIO
Parameter 3 ATTACK
Parameter 4 RELEASE
Parameter 5 GAIN
Parameter 6 KNEE
For adjusting the Dynamics parameters 1 through 6 individually.
Determines the Library number. Preset Dynamics numbers are indicated by
asterisks (*) in the display and cannot be changed.
Determines the title (name) of the Dynamics Library.
[PAGE SHIFT] + DISPLAY [
[PAGE SHIFT] + DISPLAY [
Gate
Compander Knob
Ducking
THRESH THRESH
RATIO RANGE
ATTACK ATTACK
RELEASE DECAY
GAIN HOLD
WIDTH KEY-IN
[PAGE SHIFT] + DISPLAY [
Related Block
Prompt
pages diagram
/ ]
!4
No
!2
No
!3
No
/ ]
i
No
3
4
5
6
7
8
No
/ ]
No 118
No 41