Drive System; Displaying Drive States - Siemens SINUMERIK 840D sl Commissioning Manual

Service and diagnostics

16.9 Drive system

16.9 Drive system
16.9.1

Displaying drive states

Information about the drive states of the drive units and drive objects assigned to the NCU is
provided in the "Overview" window.
Use the softkeys to select the desired drive unit, for which you want to view the drive states.
Then use the cursor to select the desired drive object, for which you want to view the drive
states in detail.
The status display (r0002) of the selected drive object is displayed completely in the lower
pane, as this information cannot be displayed fully in the upper main window for space
reasons.
Display icon
-
#
Details of the drive objects
You can display detailed information for every drive object.
190
Meaning
Green The drive object is in (cyclic) operation, without any detected
problems.
Yellow The drive object has detected a less serious problem, i.e. a
warning is pending, for example, or enables are missing.
Red This drive object has detected a serious problem, for
example, an alarm is pending.
Gray The drive status could not be determined for this drive object.
Dash A drive has not been assigned for this drive object.
Special Error when reading the data.
characters
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
HMI sl (IM9)