Configuring tool management
13.5 List of tool types
Entries
13.5
List of tool types
The following tool types are stored in the system.
Coding of tool types
The individually coded tool types are divided up into the following groups depending on the
technology used.
Turning technology
Group with type 1xy milling tools
Group with type 2xy drills
Group with type 5xy turning tools
Group with type 7xy special tools, such as a
slotting saw
94
Meaning
The following entries are changed:
Field type: Input/output field for states
Value output: All characters
Bit mask: Bit 0
Column width changed to 17 pixels.
Header changed to "TM_HL_EDGE_USER_1_Bit0"
Text in the tooltip changed to "TM_TT_EDGE_USER_1_Bit0"
Milling technology
Group with type 1xy milling tools
Group with type 2xy drills
Group with type 7xy special tools, such as a
slotting saw
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
HMI sl (IM9)