Determining The License Requirement - Siemens SINUMERIK 840D sl Commissioning Manual

Licensing

5.1 Determining the license requirement

5.1 Determining the license requirement
Procedure
Note
Use of non-licensed options
Before licensing options, you can also activate them temporarily without the license keys and
use them for test purposes. In this case, the control displays alarm 8080 periodically,
indicating that the option use has not yet been assigned the required license
24
1. Press the "All options" softkey to list all the options that can be
selected for this control.
2. Activate or deactivate the required options in the "Set" column:
• Activate checkbox or
• Enter the number of options
Options shown red are activated, however, not yet licensed or not
licensed in adequate number.
- OR -
Press the "Missing licenses" softkey to display all options that are
activated but not licensed.
In the column "Set" you can deselect the options that you do not
require again.
3. To activate new selected options, press the "Reset (po)" softkey. A
safety query will appear.
With HMI options, you will need to restart HMI sl. Corresponding
prompts will appear in the user response line.
4. Press the "OK" softkey to trigger a warm restart.
- OR -
Press the "Cancel" softkey to cancel the process.
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
HMI sl (IM9)