Fujitsu Airstage J-II Series Design & Technical Manual page 771

2-13. CENTRAL REMOTE CONTROLLER
„ ADDRESS SETTING
„
● Display the Installer Setting screen and Press the [
„
"Central Controller Address Setting".
● Press the [
„
Central remote controller address setting
● Press the [UP] button or [Down] button.
„
● Set the Address value.
„
The Address value can be set from 00 to 15.
● When the [
„
NOTES:
● Address No. can be set between "00" and "15". (Up to maximum 16 Central Remote
Controller can be installed to 1 system).
● When installing two or more Central Remote Controller, set up so that Address No.
does not overlap.
● Refer to the OPERATING MANUAL of Central Remote Controller for details.
● Keep Address No. of Central Remote Controller from overlapping the controller (Touch
Panel Controller and Network Convertor for L
Network system
] button.
] button is pressed, setting is complete.
- (07 - 124) -
] button and move the cursor to
®
W ) connected to the same VRF
ON ORKS