Fujitsu Airstage J-II Series Design & Technical Manual page 770

2-12. TOUCH PANEL CONTROLLER
„ ADDRESS SETTING
„
● Display the Installer Setting screen and press "Change" button of "1. Touch panel controller
„
address setting".
● Select "Address" from 00 to 15 on the screen and click the button. At the end of setting, click
„
"OK" button.
NOTES:
● Address No. can be set between "00" and "15". (Up to maximum 16 Touch Panel
Controller can be installed to 1 system).
● When installing two or more Touch Panel Controller, set up so that Address No. does
not overlap.
● Refer to the OPERATING MANUAL of Touch Panel Controller for details.
● Keep Address No. of Touch Panel Controller from overlapping the controller (Central
remote controller, Network convertor for L
connected to the same VRF Network system)
®
W and Modbus
ON ORKS
- (07 - 123) -
®
convertor