Fujitsu Airstage J-II Series Design & Technical Manual page 733

z SET4 setting
„
●Drainage function switch (Slim duct type only)
If contained drain pump is not used, set the drainage function to "Disable" in the drainage
function switching.
SET4-1
OFF
u
ON
*NOTE: Always confirm proper setting. Incorrect setting may cause damage from water
leakage.
●Auto louver grille setting switch (Mini duct type and Slim duct type only)
When Auto louver grille kit (optional parts) is attached, set the Auto louver grille setting
"Enable".
SET4-2 Auto louver grille setting
OFF
u
ON
●SET4-3 setting prohibited
SET4-3
OFF
u
ON
●SET4-4 setting prohibited
SET4-4
OFF
u
ON
(u...Factory setting)
Drainage function
Enable
Disable
(u...Factory setting)
Disable
Enable
(u...Factory setting)
Fixed at OFF
Setting prohibited
(u...Factory setting)
Fixed at OFF
Setting prohibited
- (07 - 86) -