Toro 07027 Installation Instructions page 4

4. Insert the tube mount into the front hitch attachment
and secure it with the clevis pin (1/2 x 2 inches) and
hairpin cotter (Figure
5. Tighten the 'T' handle on the front hitch attachment
(Figure 3).
Installing the Hose-Reel Mount to the
Rear of the Machine
1. Insert the tube mount into the hose-reel mount until
the holes in the tube mount align with the front holes
in the hose-reel mount
1. Locknut (1/2 inch)
2. Hose-reel mount
2. Secure the tube mount to the hose-reel mount with the
hex-head screw (1/2 x 2-1/4 inches) and the locknut
(1/2 inch) as shown in
3. Loosen the 'T' handle on the cargo bed receiver
5).
3).
(Figure 4).
Figure 4
3. Hex-head screw (1/2 x
2-1/4 inches)
4. Tube mount
Figure 4.
1. Tube mount
2. Cargo bed receiver
4. Insert the tube mount into the cargo bed receiver and
secure it with the clevis pin (1/2 x 2 inches) and hairpin
cotter (Figure
5. Tighten the 'T' handle on the cargo bed receiver
(Figure
(Figure
4
Figure 5
3. Clevis pin (1/2 x 2 inches)
and hairpin cotter
4. 'T' handle
5).
5).