Connecting Cables - Huawei UPS5000-E Series Quick Manual

1. Open the front and rear doors. Wrench the
anchor bolts using an wrench to adjust the
cabinet height. Use a level to level the cabinet.
4. Use the same method to secure the
connecting kits in the connection
positions on the rear door.
5. Repeat the procedure to combine other cabinets.
6. Secure the bolts using a socket wrench.
5

Connecting Cables

•
Prepare cables away from the cabinets to prevent scraps from falling inside. Cable scraps may
ignite and cause personal injury or device damage.
•
After cables have been installed, clean the cabinet in a timely manner. Ensure that there is no
foreign matter inside and around the cabinet.
2. Remove the cabinet connecting kits from the
rack.
3. Secure the connecting kits in the connection
positions on the front door using screws.
NOTE
Remove the screw from the supporting kit of
the connecting kit to secure the connecting kit.
5