Advertisement
Quick Links
Triple Monitor Desk Mount
Instruction Manual
SKU: STAND-V003T
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v003t
help@vivo-us.com
www.vivo-us.com
309-278-5303
Advertisement
Related Manuals for Vivo STAND-V003T
Summary of Contents for Vivo STAND-V003T
- Page 1 Triple Monitor Desk Mount Instruction Manual SKU: STAND-V003T Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v003t help@vivo-us.com www.vivo-us.com 309-278-5303...
-
Page 2: Package Contents
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. -
Page 3: Assembly Steps
ASSEMBLY STEPS STEP 1 OPTION A: Clamp Installation Apply rubber pads (L) to clamp (D) as shown in diagram. Attach clamp (D) to pole (E) with large screws (M) using 4mm allen wrench (Q). Secure clamp (D) to desk. OPTION B: Grommet Base Installation Remove crank from clamp (D). - Page 4 STEP 2 Slide one cable management clip (H) onto pole (E). Slide arm (C) onto pole (E) and tighten in place using 6mm allen wrench (R). Screw pole adapter (G) onto pole (E). Screw pole (F) into pole adapter. Tighten using 3mm Allen wrench (P) as shown in diagram. STEP 3 Slide one cable management clip (H) onto pole (F).
- Page 5 STEP 4 INNER HOLES Attach VESA plates (A) to monitors using screws (M-A or M-C) and washers (M-E). M- E M- A M- C OUTER HOLES Attach VESA plates (A) to monitors using screws (M-B or M-D), washers (M-E), and spacers (M-F). M- E M- B M- D...
- Page 6 STEP 6 Use VESA caps (J) and small screws (K) to secure bottom two monitors as shown in diagram. Tighten with 6mm allen wrench (R) as shown in diagram. Use knob (O) to secure top monitor as shown in diagram. Tighten with 6mm allen wrench (R) as shown in diagram. STEP 7 Use cable management clips (H) to manage cables.
- Page 7 Adjust as Desired +45° ±180° -45° +45° ±180° +45° -45° ±180° -45°...
- Page 8 - 83% within < 2hr - 92% within < 3hr www.vivo-us.com : < 15 M AVG. RESOLUTION TIME (within office hrs) : 5M 4S 309-278-5303 AVG. RESOLUTION TIME (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-V003T and is the answer not in the manual?
Questions and answers