Advertisement
Quick Links
Triple Monitor Desk Stand
Instruction Manual
SKU: STAND-V003P
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v003p
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
309-278-5303
Chat live with an agent!
Advertisement
Related Manuals for Vivo STAND-V003P
Summary of Contents for Vivo STAND-V003P
- Page 1 Triple Monitor Desk Stand Instruction Manual SKU: STAND-V003P Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v003p GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
-
Page 2: Package Contents
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. -
Page 3: Tools Needed
TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. 17.6lbs Failure to do so may result in serious injury. (8kg) PER ARM Phillips Screwdriver ASSEMBLY STEPS STEP 1 Slide cable management clip (G) and base cover (H) on to bottom of pole (B). Thread pole (B) into base (A), first loosening grub screws in the base if needed. - Page 4 STEP 3 Slide arm (C) and center VESA bracket (E) over top of pole and tighten using 5mm Allen wrench (N).
- Page 5 STEP 4 Attach cable management clips (F) to arms (C) as shown. STEP 5 Attach two bolts (M-A or M-B) and washers (M-C) to top mounting holes of monitor, making sure to leave 3mm of threads exposed.
- Page 6 STEP 5 (Continued) Align bolts (M-A or M-B) in monitor over slots in VESA plates. Secure using two more bolts (M-A or M-B) and washers (M-C) in the bottom two holes of each monitor. Tighten all bolts using Phillips screwdriver. STEP 6 Adjust tension in monitor bracket with 6mm Allen wrench (O).
- Page 7 STEP 8 WARNING: Do not move monitors behind center line. Stand can become unbalanced and cause monitors to tip. STEP 9 Adjust height of side monitors by turning bolt on top of each bracket with 5mm Allen wrench (N) as shown.
- Page 8 - 92% within < 3hr www.vivo-us.com : < 15 M AVG. RESOLUTION TIME (within office hrs) Chat live with an agent! : 5M 4S 309-278-5303 AVG. RESOLUTION TIME (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-V003P and is the answer not in the manual?
Questions and answers