Advertisement
Quick Links
Triple Monitor Desk Mount
Instruction Manual
SKU: STAND-V003M
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v003m
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
309-278-5303
Chat live with an agent!
Advertisement
Related Manuals for Vivo STAND-V003M
Summary of Contents for Vivo STAND-V003M
- Page 1 Triple Monitor Desk Mount Instruction Manual SKU: STAND-V003M Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v003m GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
-
Page 2: Package Contents
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. -
Page 3: Tools Needed
TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. 17.6 lbs (7.98 kg) Failure to do so may result in serious injury. PER SCREEN Phillips Screwdriver ASSEMBLY STEPS STEP 1 OPTION A: Clamp Installation Stick soft pads (J) to bottom of clamp base (E). Slide cable management clip (H) and base cover (I) on to bottom of pole (B). - Page 4 STEP 2 Place bushings (L) into holes at ends of arms (A). Place side VESA brackets (C) onto arms with M8x60 bolts. Secure with D8 washers (N) and M8 nuts (O), and tighten with 5mm Allen wrench (Q) and wrench (S). Do not overtighten. STEP 3 Slide arm (A) and center VESA bracket (D) over top of pole and tighten using 5mm Allen wrench (Q).
- Page 5 STEP 4 Attach cable management clips (G) to arms (A) as shown. STEP 5 Attach two bolts (M-A or M-B) and washers (M-C) to top mounting holes of monitor, making sure to leave 3mm of threads exposed. Align bolts (M-A or M-B) in monitor over slots in VESA plates.
- Page 6 STEP 6 Adjust tension in monitor bracket with 6mm allen wrench (R). STEP 7 Store Allen wrenches (R, Q) in cable management clip (G) for future use.
- Page 7 STEP 8 Adjust height of side monitors by turning bolt on top of each bracket with 5mm Allen wrench (Q) as shown.
- Page 8 - 92% within < 3hr www.vivo-us.com : < 15 M AVG. RESOLUTION TIME (within office hrs) Chat live with an agent! AVG. RESOLUTION TIME : 5M 4S 309-278-5303 (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-V003M and is the answer not in the manual?
Questions and answers