Download Print this page
Vivo STAND-V003T/W Instruction Manual
Vivo STAND-V003T/W Instruction Manual

Vivo STAND-V003T/W Instruction Manual

Triple monitor desk mount

Advertisement

Quick Links

Triple Monitor Desk Mount
Instruction Manual
SKU: STAND-V003T/W
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v003t
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
309-278-5303
Chat live with an agent!

Advertisement

loading
Need help?

Need help?

Do you have a question about the STAND-V003T/W and is the answer not in the manual?

Questions and answers

Summary of Contents for Vivo STAND-V003T/W

  • Page 1 Triple Monitor Desk Mount Instruction Manual SKU: STAND-V003T/W Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v003t GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
  • Page 2: Assembly Steps

    WARNING! ASSEMBLY STEPS If you do not understand these directions, or if you have any doubts about the safety of the STEP 1 installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product OPTION A: Clamp Installation for any purpose that is not explicitly specified in this manual.
  • Page 3 STEP 2 STEP 4 OPTION A: Flat Back Monitor Slide Cable Clip (H) and Arm (C) onto Bottom Pole (E). Secure Arm (C) in place using 6mm Allen Assemble VESA Plates (A) to back of monitors using Screw (M-A or M-B) and M5 Washers (M-F). Wrench (T-C).
  • Page 4 STEP 6 STEP 8 Level bottom monitors by turning VESA Caps (J) using 6mm Allen Wrench (T-C). Adjust monitors as Secure bottom two monitors to Arm (C) using VESA Caps (J) and M3x8mm Screws (S-A). Tighten with a desired. Phillips screwdriver. Secure top monitor to VESA Bracket (B) using Thumbscrew (S-C). Use 6mm Allen Wrench (T-C) to adjust the tilt.
  • Page 5 : 1HR 8M (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...