Advertisement
Quick Links
Triple Monitor Desk Stand
Instruction Manual
SKU: STAND-V003FG
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v003fg
help@vivo-us.com
www.vivo-us.com
1-800-371-5654
Advertisement
Related Manuals for Vivo STAND-V003FG
Summary of Contents for Vivo STAND-V003FG
- Page 1 Triple Monitor Desk Stand Instruction Manual SKU: STAND-V003FG Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v003fg help@vivo-us.com www.vivo-us.com 1-800-371-5654...
-
Page 2: Package Contents
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. -
Page 3: Tools Needed
TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. 22 lbs Failure to do so may result in serious injury. (10 kg) PER ARM Phillips Screwdriver ASSEMBLY STEPS STEP 1 Weighted Base Installation Attach Rubber Feet (i) to the underside of the Glass Base (b). Attach Soft Pad (j) to the Pole (a). - Page 4 STEP 2 Install Arm (c) to the Pole (a). Secure using M8x10 Bolts (h) with a Phillips screwdriver.
- Page 5 STEP 3 OPTION A: Flat Back Monitor Fasten the VESA Plates (q, r) to monitors using M4x12 Thumbscrews (m). Do not overtighten; Thumbscrews only need to be finger-tight. OPTION B: Curved Back Monitor Fasten the VESA Plates (q, r) to monitors using M4x30 Screws (n) and spacers (o).
- Page 6 STEP 4 Slide the center monitor onto the center head of Monitor Arm (c). Install the M4x6 bolt (t) to secure the monitor. Slide the side monitors onto the heads of Monitor Arm (c). Install the Security Nuts (s).
- Page 7 STEP 5 Adjust the tilt and swivel. Remove the plastic cover and use the Allen Key (k) to adjust swivel joint tension. Remove the plastic cover then use the wrench (l) to tighten the side tilt joints if the monitors are not fully supported.
- Page 8 Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
Need help?
Do you have a question about the STAND-V003FG and is the answer not in the manual?
Questions and answers