Feature Descriptions; Virtex Ultrascale Xcvu190-2Flgc2104Ees9847 Fpga - Xilinx VCU110 User Manual

Table 1-1: VCU110 Board Component Descriptions (Cont'd)
Callout
43 ExaMAX Backplane
Notes:
1. The VCU110 board schematics are available for download from the
2. The VCU110 board jumper header locations are shown in

Feature Descriptions

Virtex UltraScale XCVU190-2FLGC2104EES9847 FPGA

[Figure 1-2, callout 1]
The VCU110 board is populated with the Virtex UltraScale XCVU190-2FLGC2104EES9847
FPGA. For further information on Virtex UltraScale FPGAs, see Virtex UltraScale Architecture
Data Sheet (DS893),
FPGA Device Configuration
The VCU110 board supports two of the five UltraScale FPGA configuration modes:
• Master SPI using the onboard dual Quad SPI (QSPI) flash memory
• JTAG using either:
USB JTAG configuration port (Digilent module U115), or
°
Xilinx platform cable, 2 mm, keyed flat cable header (J3)
°
VCU110 Evaluation Board
UG1073 (v1.2) March 26, 2016
Feature
Connector, (J116)
[Ref 1].
www.xilinx.com
Chapter 1: VCU110 Evaluation Board Features
Notes
FCI 10126363-101LF
VCU110 Evaluation Kit
Figure A-1.
Schematic
0381556 Page
Number
57
website.
Send Feedback
12