BBU3900
Hardware Description
Label
ALARM
FAULT
Table 5-8
equipment.
Table 5-8 LEDs on the panel of the monitoring module
Label
RUN
ALM
DIP Switches
Figure 5-9
Issue 11 (2010-11-10)
Color
Name
Yellow
Alarm LED
Red
Fault LED
describes the LEDs on the panel of the monitoring module in the AC/DC power
Color
Name
Green
Run LED
Red
Alarm LED
shows the DIP switches on the PMU.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Auxiliary Devices of the BBU3900
Status
Description
OFF
An error occurs during the running
of the rectifier.
ON
Output overcurrent alarm or
overtemperature alarm
Blinking
The communication is disrupted.
OFF
The rectifier is running properly.
ON
Fan faults, output overvoltage, and
external short circuit.
OFF
The rectifier is running properly.
Status
Description
Blinking at
The module is running properly.
0.5 Hz
Blinking at 4
The module is not faulty but unable
Hz
to communicate with the PMU
properly.
ON
An alarm is generated.
OFF
No alarm is generated.
5-13