BBU3900
Hardware Description
4.8 FE/GE Surge Protection Transfer Cable
The FE/GE surge protection transfer cable is an optional cable that connects the main control
board to the UFLP.
Exterior
The FE/GE surge protection transfer cable has an RJ-45 connector at each end, as shown in
Figure
Figure 4-9 FE/GE surge protection transfer cable
(1) RJ-45 connector
Pin Assignment
Table 4-9
cable.
Table 4-9 Pin assignment for the wires of the FE/GE surge protection transfer cable
Pin on the RJ-45
Connector
X1.2
X1.1
X1.6
X1.3
X1.4
X1.5
X1.8
X1.7
4.9 FE/GE Optical Cable
The FE/GE optical cable is used to transmit optical signals between the BBU3900 and the
transmission device. This cable is optional.
Issue 11 (2010-11-10)
4-9.
describes the pin assignment for the wires of the FE/GE surge protection transfer
Wire Color
Orange
White
Green
White
Blue
White
Brown
White
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Wire Type
Pin on the RJ-45 Connector
Twisted pair X2.2
X2.1
Twisted pair X2.6
X2.3
Twisted pair X2.4
X2.5
Twisted pair X2.8
X2.7
4 BBU3900 Cables
4-13