Setting(Others): Error And Temperature Indications - Mitsubishi Electric KD Series User Manual

5-2 Setting(others):
Error and Temperature Indications
Address Register name
DeviceTemperature
7224h
Mainboard
DeviceTemperature
7228h
Ifboard
7230h DeviceError
5-2-23 Error and temperature indications
[Function]
This function enables to provide some indications of errors,
when cooling fan is stopped or operates at slow speed or a
temperature of internal FPGA becomes abnormally high.
Additionally, this function can provide an information of the
temperature of the internal FPGA.
The unit of reading data is Centigrade degree.
Example: Reading data 1Eh(hex digit)
= Temperature of the internal FPGA
TM-XJ959A
R/W Parameter
Data
Indicate an internal temperature (℃) of FPGA on Image
R - processing board (When using multiple image processing
boards, this function indicates the maximum value.)
Indicate an internal temperature (℃) of FPGA on I/F board.
R - (When using multiple image processing boards, this function
indicates the maximum value.)
Return "Error" indications about cooling fan and FPGA
temperature.
0：Operating normally
R 0 to 7 '1' at bit0: Error of cooling fan.
'1' at bit1: Abnormal temperature of FPGA on Image
processing board
'1' at bit2: Abnormal temperature of FPGA on I/F board
30 Centigrade degree.
Function
[Remark]
1) When you read the registers, this product returns a
value which shows the internal status of this product.
Please confirm by reading the registers if there is an
error or not. (On your control software attached with
your frame grabber, the software indicates the last
value you operated "read". This value will not be
updated until you will operate "read" again.
Initial
-
-
-
88
© Mitsubishi Electric Corporation