Programme Info; Miele@Home - Miele TWJ 660 WP Operating Instructions Manual

Programme info

The programme names and load size,
which are lit in the display when the
programme is selected with the
programme selector, can be switched
off.
Selection
- (programme name and load size
Off
are not displayed)
-
Programme name
not appear in the display.
-
Prog. & max load
factory setting)

Miele@home

Control the networking of your tumble
dryer with your home WiFi network.
The following points may appear in the
submenu:
–
Set up
This message only appears if the
tumble dryer has not yet been
connected to a WiFi network.
Please refer to "Before using for the first
time" for instructions on how to set up
the connection.
– Deactivate (Visible if Miele@home is
activated)
Miele@home remains set up, the WiFi
function is switched off.
– Activate (Visible if Miele@home is
deactivated)
The WiFi function is reactivated.
The load size does
(both are displayed,
– Connection status
Miele@home is activated)
The following values are displayed:
- the quality of WiFi reception
- the network name
- the IP address
– Set up again (Visible if set up)
Resets the WiFi login (network) to
immediately re-establish a new
connection.
– Reset (Visible if set up)
- The WiFi is switched off.
- The WiFi connection will be reset to
the factory default setting.
The network configuration should be
reset whenever a tumble dryer is being
disposed of or sold, or if a used tumble
dryer is being put into operation. This is
the only way to ensure that all personal
data has been removed and the
previous owner will no longer be able to
access the tumble dryer.
A new connection has to be established
in order to use Miele@home again.
Settings
(Visible if
89