Operating The Sensor Controls - Miele TWJ 660 WP Operating Instructions Manual

Operating the tumble dryer
f Optical interface
This is used by your Miele dealer as
a transmission point.
g Sensors for extra options
You can select extra options to
augment drying programmes.
If a drying programme has been
selected, the sensor controls for the
possible extra options light up dimly.
h  sensor
You can use the  sensor to call up
an energy consumption forecast for
the selected drying programme.
See "Washing environmentally and
economically", section
"EcoFeedback" for more
information.
i  sensors
The  sensor starts the delay start
function. With the delay start
function, you can choose when you
want the programme to start. The
start of the programme can be
delayed from 15 minutes up to a
maximum of 24 hours. This allows
you to make use of night-time
economy electricity rates, for
example.
For further information see "4.
Selecting programme settings"
20
j Start/Add laundry sensor control
Touching the Start/Add
laundry sensor control starts a
programme. The current programme
can be interrupted to add laundry.
The programme can be started when
the sensor control is flashing on and
off. The sensor control lights up
constantly once the programme has
started.
k Programme selector
This is used for selecting
programmes and for switching off.
The dryer is switched on by
selecting a programme, and
switched off by turning the
programme selector to the 
position.

Operating the sensor controls

The sensor controls react to fingertip
contact. Selection is possible as long
as the respective sensor is illuminated.
If a sensor is brightly lit, this means:
currently selected
If a sensor is dimly lit, this means:
selection possible