Before Using For The First Time; Downtime After Installation; Miele@Home - Miele TWJ 660 WP Operating Instructions Manual

Before using for the first time

Downtime after installation


Damage to the tumble dryer by
switching it on too soon.
This can damage the heat pump.
After setting up the tumble dryer wait
for at least one hour before switching
it on.
Protective foil and stickers
removal
 Remove:
- The protective foil from the door
- Any stickers from the front and the lid
Please do not remove any labels
(e.g. the data plate) which are visible
when you open the door.
22

Miele@home

Your tumble dryer is equipped with an
integrated WiFi module.
In order to use it you need:
- a WiFi network
- the Miele@mobile app
- a Miele user account. The user
account can be created via the
Miele@mobile app.
The Miele@mobile app will guide you as
you connect your tumble dryer to your
home WiFi network.
Once your tumble dryer is connected to
your WiFi network you can use the app,
for example, to carry the following
activities:
- Controlling your tumble dryer
remotely
- Calling up information on the
operating status of your tumble dryer
- Calling up information on the
programme sequence of your tumble
dryer
Connecting your tumble dryer to your
WiFi network will increase energy
consumption, even when the tumble
dryer is switched off.
Before installing the tumble dryer in
its final location, ensure the signal
strength is sufficient for your WiFi
network.
Availability of the WiFi connection
The WiFi connection shares a frequency
range with other appliances (including
microwave ovens and remote control