Toshiba Strara CTX Series Installation And Maintenance Manual page 130

PCB Installation
Table 4-5 BIOU Controls, Indicators, and Connectors
Control/Indicator/Connector
SW600
J1, J2, J3
MOH1, MOH2, MOH3
SP
B/M
N.C/N.O
SW1 Mu/A
4-8
Type of Component
Page Output Switch
RCA jack for connecting
MOH/BGM source
Screwdriver volume
control
Screwdriver volume
control
Break/Make control relay
jumpers
Jumper plug
Jumper plug
Description
SP0=600 ohms. SP1 = 3-watt amp.
Interface connector for MOH/BGM source 1, 2,
or 3.
Adjusts volume of respective MOH jacks 1, 2,
and 3.
Adjusts volume of SP1; 3-watt page amplifier.
Set in the Make (close) or Break (open)
position, depending upon which one should
occur when the application relay activates.
Not used.
Select A law for U.K.
Strata CTX I&M September 2002