Filling The Dispensing System - Miele PLW 8615 Operating Instructions Manual

System settings
Filling the dis-
pensing system
64
Fill dispensing system
The
pensing system. The function must be carried out after a container for
process chemicals is filled or replaced with a full container.
The function can only be carried out if there are no load carriers in
the wash cabinet.
Press the Fill dispensing system

Press the button for the required dispensing system, e.g.,

The individual steps are shown on the display during the process.
Once the process has finished, a message will appear on the display:
Dispensing system DOS 1 filled.
or
Dispensing system DOS 1 not filled. Repeat Fill dispensing system
Press OK to confirm the message.

If the process of filling a dispensing system is not repeated suc-
cessfully, contact Miele Technical Service.
function is used to prime the relevant dis-
button.
DOS 1 .
.