The Advanced Window - Canon Oce BLM550+ Operation Manual

The ADVANCED Window

Introduction
The ADVANCED
Button overview
Button
RE-REF
STITCHER UP
PURGE SET
- MAKE BOOK
window gives you access to special machine functions.
Information
If the machine calibration appears incorrect or if an 'axis moving'
error message remains on the screen, touch RE-REF to re-refer-
ence the adjustment axes. The adjustment axes return to the cur-
rent settings. At intervals, the machine will re-reference the axes
during the set-up procedure.
Touch STITCHER UP before you lubricate the stitch head. This ac-
tion moves the stitch head to the correct position for lubrication.
If the print job has been canceled, a set or part of a set can remain
in the gathering area. Touch START , then touch PURGE SET to
clear the set from the machine. The book is not stitched or trim-
med
According to the type of error that occurred, there can be a pause
of 7 seconds before the PURGE SET button will operate.
For safety reasons, this function is disabled when the gathering
area cover is open.
If there is a set in the gathering area, you can make the set into a
book.
NOTE
Do not use this option if SET THICKNESS is set to AUTO.
Touch START
machine. The book is not stitched or trimmed.
According to the type of error that occurred, there can be a pause
of 7 seconds before the MAKE BOOK button will operate.
For safety reasons, this function is disabled when the gathering
area cover is open.
then touch MAKE BOOK to clear the set from the
Chapter 4 - The User Interface
The ADVANCED Window
37