Clean The Former Roller - Canon Oce BLM550+ Operation Manual

Clean the Former Roller

Clean the Former Roller
Introduction
Clean the former roller:
• Every month, as part of the operator maintenance plan.
• If the spines of the books are dirty. Ink and toner can collect on the former roller.
[44] Dirty marks on the spine
Required tools
Clean, plain paper that is not printed. A3 size (USA: 11 x 17") is recommended. 4mm thickness is
needed for each cycle. More than one cycle can be needed
Step
1
2
3
4
5
6
Result
The book is delivered to the stacker. Check the book. Repeat the procedure until the book spine is
clean.
112 Chapter 7 - Maintenance
Action
Enter the correct settings on the
touch screen.
Touch START
Open the connecting bridge cover.
Lift the gathering area cover.
Put 4mm of clean paper in the gath-
ering area.
Press the two orange buttons and
hold for 9 seconds, or until you hear
the folder operate.
Information
• Set the touch screen to the correct PA‐
PER SIZE
• Set the SET THICKNESS to 4.0
• Set the number of STITCHES to 0.
• Set the number of FORMS to 4.