Appendix A: Exposure To Radio Frequency Energy; Appendix B: Agency Identification Label Locations; Figure 7. Agency Identification Label Locations - Toro 2024 Operator's Manual

Long-range exit-side lockout kit, directional drill
Hide thumbs Also See for 2024:
Table of Contents

Advertisement

Appendix A: Exposure to Radio Frequency Energy

SmaRT handheld remote units contain radio transceivers. When active, handheld remotes send
out radio frequency (RF) energy through its internal antenna.
For optimal performance and to ensure that human exposure to RF energy does not exceed the
recommended guidelines, always follow these instruction and precautions: When using the
handheld remote, hold the remote so that the top buttons are away from the body in the direction
of the base unit. Keep the remote when in use at least 15mm (5/8 inch) away from the body, and
only use carrying cases, belt clips, or holders that are approved by Cervis, Inc.
A SmaRT base unit when active sends out radio frequency (RF) through its external antenna.
Base units using an external antenna should be mounted to ensure the antenna is at least 20cm
away from the human body.

Appendix B: Agency Identification Label Locations

10
Note: The base unit label position is identical for
both internal antenna and external antenna base
units.

Figure 7. Agency Identification Label Locations

WSMB-7588 JEM Technical
WSMB-7588_ESM 2-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

4045130-4454

Table of Contents