4
Installing Fiber Management Trays
a
Exterior of the Fiber Management Tray
Fiber hole
c
Installation Method
Install mounting ears on the fiber management tray.
By default, the fiber management tray is installed in the lower part of the cabinet and is more than
50 mm away from the subrack. The fiber management tray must also be more than 50 mm away
from the air inlet and outlet of the subrack. The fiber management tray can be installed in a cabinet
that is not fully configured with subracks, but future expansion will be affected due to reduced
installation space in the cabinet.
b
Mounting ear
Plate
Phillips screwdriver
9
Positions of the Installation Holes
a
a
Holes for installing mounting ears of the N63B cabinet
b
Holes for installing mounting ears of the T63 cabinet
c
Holes for installing mounting ears of the N63E cabinet
Secure the fiber management tray in the cabinet.
b c
>50 mm