b
Installation Procedure
Phillips screwdriver
1
1
Secure the two mounting ears to the
SS62COA chassis.
2
Secure the SS62COA into the cabinet.
To install the SS62COA inside the cabinet, you need to provide a space with 125 mm in height. By default, the
SS62COA is installed at the bottom of the cabinet (first and third floating nuts). The spacing between the
SS62COA and the subrack is more than 50 mm. The SS62COA can also be installed in the other position of the
cabinet which is not fully configured. The capacity expansion will be, however, affected in the future because the
space is occupied.
2
15