Advertisement
Installation Reference
Optional: Installing an OAU 2F on a Pole
1
Pass the hose clamps through the pole mounting bracket and fix the hose clamps on a pole using
the screws of the hose clamps.
Optional: Installing an OAU 2F on a Wall
Press the pole mounting bracket against a wall, level the installation location using
1
a level, and mark locating points using a marker.
2
Drill holes and install expansion bolts in the locating points.
M6x60 bolt
a
Nut
Spring washer
Flat washer
Expansion sleeve
45 mm to 50 mm
Ensure that each expansion bolt protrudes from the wall for 8 mm to 12 mm.
Install the pole mounting bracket onto the expansion bolts, place a flat
3
washer, a spring washer, and a nut on each expansion bolt, and then
tighten the nuts.
Locating point
Pole mounting
bracket
b
c
Fasten the OAU 2F box, which has a conversion bracket, on the
2
pole mounting bracket using screws. Then, turn the box gently (in
both the horizontal and vertical directions) to check whether the box
is securely installed.
11
3
Fasten the extra portion of the hose clamps onto
the pole using outdoor binding straps.
Fasten the OAU 2F box, which has a conversion bracket, on
4
the pole mounting bracket using screws. Then, turn the box
gently (in both the horizontal and vertical directions) to check
whether the box is securely installed.
Advertisement
