GE eBike Service Manual page 91

Part No. Short Description
2018111-139 SPARE EBIKE DRIVE UNIT EXCHANGE/2
2018111-032 SPARE EBIKE STRAIN GAUGE
2018111-033 SPARE EBIKE RETURN SPRING
2018111-140 SPARE EBIKE PCB RPM2
Power supply eBike:
2018111-141 SPARE EBIKE POWER SUPPLY/3
2018111-036 SPARE EBIKE EARTH CABLE
2018112-003 Rev J
Appendix B: Spare Parts
Description
Service Kit: drive unit, replacement, for eBike, consisting of:
1x drive unit, replacement, assembled
6x screw M8x20
6x star washer 8.4x15x0.8
Service Kit: Strain gauge, kit consisting of:
1x strain gauge, pre-assembled for drive unit eBike
1x clamping plate
2x star washer F3.2
2x screw M3x10
1x micro rope, short, diam. 0.81 mm 7x7, length 88.7 mm, for eBike
Service Kit: return spring with micro rope, consisting of:
1x return spring with micro rope, diam. 0.6 mm 1x19, length 125 mm
1x clamping plate
2x star washer F3.2
2x screw M3x8
Service Kit: PCB RPM, fully equipped for eBike
1x PCB RPM
1x spacer pin M3, length 12 mm
2x star washer F3.2
2x screw M3x8
1x addendum for PCB RPM 2
Service Kit: power supply module for eBike, kit consisting of:
1xpower supply 24V, 2.5A, 60VA, 50/60 Hz, preassembled on sheet panel
1x interface cable connecting to power supply
1x cable connecting the power supply to the power switch
4x screw M4x12
2x star washer, diam. 4.3 mm
1x hex nut M4
1x washer, diam. 4.3 x 12 x 1
2x microfuse 1.25A, slow-blow
1x sticker with fuse and power ratings (narrow)
1x sticker with fuse and power ratings (wide)
1x addendum for power supply
Service Kit: earth cable, kit consisting of:
1x earth cable, 1.5 mm2, 100 mm
2x disk Z4.3x8x0.5 inside
1x hex nut M4
1x washer, diam. 4.3 x 12 x 1
eBike, eBike L, eBike EL - 85 -