Table of Contents
Advertisement
The program will not work if a USB <-->RS232 converter is used to simulate the RS232
interface.
The update program works with the following operating systems: WIN2000, WIN NT4, WIN
XP (recommended: PC with 1 GHz or more).
Note:
Use only the COM 1 port.
* Using the null modem, connect the ergometer (PORT 2) to the PC (COM 1).
Figure D-1: Pin assignment for software update
all eBikes
Firmware FW1.8 is used.
Copy the update program 2020259-009 SW FIRMWARE
EBIKE FW18.zip to a directory on the PC (e.g.
C:\Update_eBike), unpack the file and save the
corresponding update files to the same directory.
Note:
The Software file cannot be ordered. Please
download this file from the Service Homepage.
* Switch on eBike and select Service menu.
eBike:
Select menu item Software Update in the service
menu (the display shows the current software version)
and activate update process with the softkey UPDATE
at the ergometer first.
"Software Update is running" is displayed at the
ergometer
PC: Open the update program ERGOselect.exe
.
PC:
Close all applications and confirm the message with "OK".
2018112-003 Rev J
D: Service Menu
eBike, eBike L, eBike EL
- 57 -
Hide quick links:
Advertisement
Table of Contents
