E-2.3 Rpm Board : Replacement And Adjustment Procedure - GE eBike Service Manual

E-2.3 RPM Board : Replacement and Adjustment Procedure

Replacement of PCBRPM Boards 1 and 2
- 68 -
E: Drive Unit
Disconnect ergometer from mains supply.
Dismantle Ergometer as described in Service Manual.
Cut cable tie.
Disconnect cable to strain gauge (black wire at the
bottom).
Remove fixation screws of RPM board
Disconnect both cables to eddy-current brake.
eBike, eBike L, eBike EL 2018112-003 Rev J