Adjusting The Cutting Unit - Toro Greenmaster Flex 1820 Operator's Manual

Adjusting the Cutting Unit

1. Support the cutting unit; refer to
Cutting Unit (page
2. Adjust the bedknife to the reel; refer to
the Bedknife to the Reel (page
3. Adjust the rear roller height; refer to
the Rear-Roller Height (page
4. Adjust the height of cut; refer to
Height of Cut (page
5. Adjust the cut-off bar; refer to
Cut-Off Bar (page
6. Set up and prepare the cutting unit as described
in the traction unit Operator's Manual.
Supporting the
9).
Adjusting
10).
Adjusting
10).
Adjusting the
11).
Adjusting the
13).
7