Update Time; Average % Days; My Location; Signal Strength - Toro Evolution Series Manual

Update Time

This is the time at which the sensor will update the controller
with new ET data. If irrigation were to commence at 6am, for
example, it might be advantageous to have ET data sent to the
controller at 5:45am to optimize watering runtimes.
1. Press or to adjust the hour, minute, and AM/
PM fields.
2. Press or to switch from one field to another.
3. Press to input the value.

Average % Days

This is the previous number of days from which the sensor
will use to generate an average runtime value. This is done to
minimize the impact of unseasonably cold or hot days. Values
range from 1-7 (days).
1. Press or to change the number of days.
2. Press to input the value.

My Location

Setting the My Location is necessary for ET data to work. It
is possible to set the location by either U.S. ZIP Code or by
Latitude and Longitude. (See Step 7 illustration, page 6.)
1. To adjust TYPE, press
to select LONG/LATor ZIP CODE.
Press
2. Press . Adjust Zip Code or Latitude and Longitude
to move to ZIP CODE.
values with the and
Use and to switch between number fields.
3. When done, move to CONTINUE. Press
After a moment, the screen should display SUCCESS.

Signal Strength

Indicates signal strength as a series of bars ( ).
WEATHER SENSOR
AVERAGE % DAYS
ID
MY LOCATION
MY LOCATION
SIGNAL STRENGTH

BATTERY LEVEL

Battery Level
Displays the charge level of the battery in the weather sensor.
(See above illustration.)
buttons.
.
GOOD
11