Advertisement
7
Installing the HOC Bracket
Assemblies and the Front
Roller
Parts needed for this procedure:
6
Adjuster pin
6
Cotter pin
3
Left HOC bracket assembly
3
Right HOC bracket assembly
6
Flange locknut (3/8 with 5/8 inch hex)
Procedure
1.
Loosely install the left and right HOC bracket
assemblies and the front roller assembly to the
cutting-unit side plates using the previously
removed carriage bolts
Figure 10
1. Right HOC bracket
assembly
2. Front roller assembly
3. Left HOC bracket
assembly
2.
On the left side, slide the adjuster-arm rod of the
HOC bracket into the gap on the groomer drive
box and secure it with an adjuster pin and cotter
pin as shown in
Figure
(Figure
10).
g246878
4. Washers
5. Carriage bolt and flange
locknut (3/8 with 5/8 inch
hex)
11.
1. Adjuster pin
2. Adjuster-arm rod
3.
On the idler assembly side, align the
adjuster-arm rod of the HOC bracket with the
adjuster collar on the idler assembly and secure
it with an adjuster pin and cotter pin
1. Adjuster pin
2. Adjuster-arm rod
3. Adjuster collar
4.
Tighten the carriage bolts and locknuts securing
the HOC bracket assemblies to the side plates
(Figure
13).
7
Figure 11
3. Cotter pin
4. Groomer drive box
(Figure
Figure 12
4. Cotter pin
5. Idler assembly
g232400
12).
g232388
Advertisement
