Advertisement
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
9
10
11
Description
No parts required
No parts required
No parts required
Extended splined insert (right-hand
threads)
Extended splined insert (left-hand
threads)
Flange locknut (3/8 inch)
Weight bracket
Hex-socket, button-head bolt (3/8 x 3/4
inch)
Groomer drive box (left drive)
Groomer drive box (right drive)
Hex-socket bolt (3/8 x 3/4 inch)
Pivot hub
O-ring
Idler assembly (left)
Idler assembly (right)
Jam locknut (3/8 inch)
Adjuster pin
Cotter pin
Left HOC bracket assembly
Right HOC bracket assembly
Flange locknut (3/8 with 5/8 inch hex)
Cap
Bolt (1/4 x 1-1/2 inches)
Jam nut
Shaft clamp
Carriage bolt (5/16 x 3-1/2 inches)
Spacer
Flange nut (5/16 inch)
Weight
Carriage bolt (5/16 x 3-1/2 inches)
Spacer
Flange nut (5/16 inch)
Weight
Qty.
–
Prepare the machine.
–
Gather the tools required for setup.
Determine which side the groomer
–
should be installed on.
2
Prepare the cutting unit.
1
6
3
6
Install the weight bracket and groomer
drive box.
2
1
6
3
3
Install the idler assembly.
1
2
6
6
6
Install the HOC bracket assemblies and
3
the front roller.
3
6
Install the groomer drive cap (For
3
universal groomer assemblies with no
rear roller brush kit installed only).
12
Install the groomer assembly (ordered
12
separately) and optional broomer kit.
12
6
Install the weights (groomer only, with
6
or without front grass baskets and rear
6
cutting unit without rear grass basket).
18
6
6
Install the weights (with groomer and
rear roller brush).
6
12
2
Use
Advertisement
