Advertisement
9.
Remove the 2 flange-head bolts and washers
securing the support rod, and remove the
support rod
(Figure
Note:
Retain the flange-head bolts.
1. Flange-head bolts (2)
2. Support rod
10.
Install the 2 existing flange-head bolts from the
inside of the cutting unit and secure them with
the 3/8 inch flange locknuts provided.
1. Flange locknut (3/8 inch)
5).
Figure 5
3. Washer (2)
Figure 6
2. Flange-head bolt
5
Installing the Weight
Bracket and the Groomer
Drive Box
Parts needed for this procedure:
3
Weight bracket
6
Hex-socket, button-head bolt (3/8 x 3/4 inch)
2
Groomer drive box (left drive)
1
Groomer drive box (right drive)
Procedure
g192295
1.
Identify the left drive groomer drive boxes and
the right-drive groomer drive boxes; refer to
Figure
7.
1. Right (yellow) adapter
2. Left (green) adapter
2.
Secure the weight bracket to the reel using 2
hex-socket, button-head bolts (3/8 x 3/4 inch)
as shown in
g246824
Note:
Attach the weight bracket to the side of
the reel where you intend to mount the groomer
drive box.
5
Figure 7
3. Groomer drive box—right
drive
4. Groomer drive box—left
drive
Figure
8.
g037105
Advertisement
