Lenovo ThinkSystem SR650 Series Setup Manual page 177

• To install the riser 2 assembly, align the rear of the riser 2 assembly with the corresponding rail guides
in the rear of the chassis. Then, carefully press the riser 2 assembly straight down into the chassis
until it is fully seated.
Figure 102. Riser 2 assembly installation
Install a PCIe adapter on the system board
Use this information to install a PCIe adapter on the system board.
"Read the
installation
Guidelines" on
page 126
Notes:
• Depending on the specific type, your PCIe adapter might look different from the illustration in this topic.
• Use any documentation that comes with the PCIe adapter and follow those instructions in addition to the
instructions in this topic.
"Power off
the server for
this task" on
page 194
"ATTENTION:
Static Sensitive Device
Ground package before opening"
on page 127
.
Chapter 3 Server hardware setup
173