Margin Adjustment (Second Side) - Canon AD2 Service Manual

5
Installation > Adjustment

■ Margin Adjustment (Second side)

1) Make 2-sided copies using the Cassette 4, and check that the left edge margin is
2.5±2.0mm.
Feed direction
of paper
F-5-33
2) As for nonstandard, change the left edge margin adjustment value for the second side of
the 2-sided copy from the Cassette 3.
As making the following selection: Service Mode > COPIER > ADJUST > FEED-ADJ >
ADJ-C3RE and set 1 value larger, the left edge margin becomes 0.1mm smaller.
3) Enter the value set to the left edge margin adjustment value for the second side of the
2-sided copy from the Cassette 3 as the side registration adjustment value for the second
side of the 2-sided copy from the Cassette 4.
Service Mode > COPIER > ADJUST > FEED-ADJ > ADJ-C4RE
4) To enable the setting value, turn off/on the Main Power Supply of the equipment.
5) Make 2-sided copies using the Cassette 4, and check that the left edge margin is
2.5±2.0mm.
6) As for nonstandard, change the left edge margin adjustment value for the second side of
the 2-sided copy from the Cassette 4.
As making the following selection: Service Mode > COPIER > ADJUST > FEED-ADJ >
ADJ-C4RE and set 1 value larger, the left edge margin becomes 0.1mm smaller.
7) Enter the new adjustment value on the Service Label.
ADJ-C3RE
ADJ-C4RE
8) Get out from the service mode.
5 Installation > Adjustment
image
5-12
5-12