Canon AD2 Service Manual page 38

5
Installation > Installation Procedure
16) Install the Connector Cover.
• 1 screw with toothed washer (Use the screw removed in the step 11.)
17) Secure the equipment in place with the 4 adjusters.
NOTE:
Securing of the adjuster is not earthquake resistant.
5 Installation > Installation Procedure
18)
19)
F-5-21
F-5-22
NOTE:
• When installing the host machine simultaneously, be sure to follow "Unpacking and
Installation" in the Installation Procedure Manual.
• When installing this equipment later, be sure to follow the following procedure.
Connect the Power Supply Plug of the Host Machine to the outlet.
Turn on the Main Power Supply Switch of the Host Machine.
5-8
5-8