Installation Procedure - Canon AD2 Service Manual

5
Installation > Installation Procedure

Installation Procedure

1) Open the Right Lower Cover.
CAUTION:
Be sure to open the Right Lower Cover when placing the Host Machine; otherwise, it
may be damaged.
2) If there is the Right Lower Sub cover 1 of the Host Machine, remove it by using flat blade.
NOTE:
When installing the host machine at the same time, skip this step because the Right
Lower Sub Cover is packed with the host machine.
Right Lower Sub-cover 1
5 Installation > Installation Procedure
F-5-10
Flat-blade screwdriver
F-5-11
CAUTION:
• The host machine weighs maximum 134kg. It is recommended to lift it with 4 people
or more. However, if there is a standard to handle a heavy load in each sales
company, follow it for operation. Also, make sure to lift the machine with keeping it
level at operation.
• Because the gravity center is in the rear, lift with care.
. s c r e w d r i v e r
5-5
F-5-12
5-5